On a recent trip to Australia and New Zealand, LeMons Assistant Perpetrator TheEastBayKid found some pretty nice not-found-in-North-America vehicles.

Holden HJ (?) Panel Van, Sydney
Toyota FJ40 Land Cruiser, Airlie Beach Australia
Toyota FJ70 Land Cruiser, Airlie Beach Australia
Mazda 1000 (?) Ute, Brisbane
Daimler SP250, Wellington
Citroen Diane, Wellington
Citroen DS, Wellington
Austin Mini, Wellington
Land Rover Defender 110 Crew Cab, Wellington
BMW 320i (E30) Touring, Wellington
Nissan Safari (Y60 Patrol), Wellington

With your choice of either TDV8 diesel or 5.0-liter gasser, Overfinch starts with a host of pleasant but rather pedestrian upgrades (wheels, lights, tires, exhaust, fascia) and then outfits the shepherd's pie out of it. Top-of-the-line leather on everything, including an Alcantara headliner, is a given. The first special bit is the center console between the rear seats, complete with a fridge and storage compartment. Once again, nothing completely out-of-the-ordinary.

What truly raises this Rover to the level of sublimely obscene is the partnership with Holland & Holland which brings the rear, bespoke cupboard; a hand-crafted cabinet complete with crystal glasses and flutes, shotguns, cartridge holders and liquor. Even better, the company will restock your bar for a year. And what's in the bar?

Pol Roger Champagne, Balvenie single malt whiskey, Hendrick's single batch gin, Ivan The Terrible luxury vodka, and Willow Spring Water. Sure, it'll smell like cigar smoke and angina by the end of that year, but it's totally worth the $196,000 export cost.

We are all English, today, gents.

[Carscoop]

Stepping up to the LR4, you immediately see an SUV very similar to the LR3 — but with a few minor updates. The LR4 gets exterior enhancements such as new tail lights, a two-bar mesh grille (with matching fender vents — ooh!) and new front bumper and fenders. But the exterior was never the problem for us.

The two biggest problems we had with the 5,800 lb. LR3 were the clumsy and — thanks to the 300 HP, 315 lb-ft o' torque 4.4-liter V8 under its hood that helped it to chug to 60 mph in an anemic 8.6 seconds — sluggish on-road experience and an interior that seemed to borrow more from the Ford parts bin than a luxury vehicle ought to.

Land Rover's fixed the first problem with a brand new engine for the LR4 — 375 HP, 375 lb-ft of torque 5.0-liter direct-inject V8 — mated to a new, upgraded 6-speed ZF auto tranny with a select-a-gear manumatic system called "Commandshift." The powertrain upgrade's propel the 5,800 lb-plus SUV from 0-to-60 in a manufacturer-claimed 7.5 seconds while simultaneously getting the same 12 / 17 City / Highway fuel economy numbers as the LR3 and helps the once-only-capable-off-road SUV feel like it's got the power necessary to get back home from a to-late-for prep school night date faster than your over-Xanaxed parents can ground you.

But the engine wasn't the LR3's only problem. It was combined with a teeth-rattling suspension. Luckily, Land Rover redesigned the LR4's front suspension, increasing the stiffness of the anti-roll bars, and provided the dampers some much-needed re-tuning. All of those suspension upgrades combine to significantly reduce the LR3's much-maligned tendency for body roll 'round the turns and make the overall on-road driving experience shockingly significantly better.

The LR3 was always capable off-road. Land Rover added some minor updates and tweaks to their Terrain Response system that, combined with the traction-control system and the automatically locking differentials, makes the LR4 even more-so. Whether slipping through two-foot-deep muddy ruts in the hills of Vermont, or scrambling over foots and tree stumps that managed to fell even a mighty Land Rover Defender, the LR4 took on anything in front of it.

But back to the second problem with the ol' LR3 — the interior. If we look at Land Rover's LR2 as the entry-level into the second oldest off-road brand, then the LR3 was always meant to kick things up a notch. For the mid-level buyers in the $45,000+ luxury SUV segment to go "Yeah, I'll try one of those $95,000 Range Rovers — you know, so I can give this to the kids." However, thanks to an interior with a center console that looked like it was built out of alphabet blocks from Peter Horbury's parts bin and plastics that somehow managed to be simultaneously rock-hard and flimsy.

The seven-seater LR4's interior has been completely redesigned from that craggy mess into something that actually approaches luxury rather than sidestepping it to save money. The center console almost flows into the rest of the dash. The key controls have been repositioned to enhance both the appearance as well as ergonomics. And speaking of ergonomics, the LR4 also receives an optional captain's chair with side bolstering — a must-have for off-roading in order to avoid smacking your left side into the door on sudden, steep sideways descents. And speaking of the seats — thank god for Land Rover's continuing use of infinite-adjusting arm rests. I wish more automakers still had anything approaching that minor, but important, accoutrement.

The LR4 is substantially better than its parts-bin-born predecessor and shows that maybe Land Rover's new Indian owners can teach the Americans — and even the British — a bit about luxury.

It should. It looks exactly like the LRX concept except it has doorhandles. Yes, this includes the Land Rover signature design elements like the clamshell hood, the floating roof and the 'wheel-at-each-corner' stance. Also, a penchant for being purchased by well-heeled Wall Street execs for their baby girls heading off to college.

Other interesting news to note is the new two-door will be built in the Halewood plant in Liverpool, subject to quality and productivity agreements. We're also being told the "West Midlands manufacturing will transfer from two plants to one by the middle of the next decade."

Full press release below:

Small Range Rover confirmed for production

Gaydon, Warwickshire, 24 September 2009 – Land Rover has confirmed today a production version of its exciting LRX concept car will be built. The new car will debut next year and join the Range Rover line-up in 2011.

Designed and engineered at Land Rover's state of the art Gaydon facility, the new Range Rover will be the smallest, lightest and most efficient vehicle the company has ever produced.

The new car will be built at the multi award-winning plant in Halewood, on Merseyside, subject to quality and productivity agreements and will be sold in over 100 countries around the world.

Phil Popham, managing director of Land Rover said: "The production of a small Range Rover model is excellent news for our employees, dealers and customers. It is a demonstration of our commitment to investing for the future, to continue to deliver relevant vehicles for our customers, with the outstanding breadth of capability for which we are world-renowned."

"Feedback from our customer research also fully supports our belief that a production version of the LRX Concept would further raise the desirability of our brand and absolutely meet their expectations." Phil added.

Gerry McGovern, Land Rover design director said "The new vehicle will be a natural extension to the Range Rover line-up, complementing the existing models and helping to define a new segment. It will be true to the concept and have many recognisable Range Rover design cues including the signature clamshell bonnet, the floating roof and the solid 'wheel-at-each-corner' stance."

More details of the new small Range Rover will be released next year.

[EnglishRussia]

There was a lot of argument over the merits of yesterday's XR4Ti, but there was general consensus that it really needed the bi-plane rear spoiler to seal the deal.

Today we're doing short arm inspection on another European immigrant. This Land Rover D90 represents a recent frame-off refurbishing. While that means that everything has had a look, and a fresh coat of English white applied, it doesn't mean that the trucklette is restored to factory-fresh condition. The seller claims it to be registered as a '69, but as it shares both front clip and former Buick V8 with a much more modern version, it competes with Angelyne for concealment of its true age. Additionally, the restoration only went as far as providing for occasional summer happy, happy, fun-time driving as a top, roll bar, and full complement of gauges didn't factor in. Regardless, the D90 (93 inch wheelbase) is claimed complete enough to drive home.

The name of this Land Rover reflects its piecemeal restoration. The Defender model is a continuation of the Land Rover Ninety, the 1983 debutant which diverged from the precedent Series III by the adoption of coil springs all the way around. A true '69 would be a series IIA with leaf springs and a likely 2.25 litre diesel engine. While the headlamps did move to positions in the wings that year, those said wings extended past the bonnet on the IIA. This amalgamation, while a '69 in the eyes of the DMV, is really a much more modern vehicle, which weighs in its favor.

But is that price also in its favor? A washington shy of twelve grand may seem a lot for a summer time jitney, but Defenders are more dear than their American CJ Jeep cousins, and looking at Defender prices indicate a typically higher levy.

So what do you think about this puzzle-piece Land Rover? Does $11,999 make this Defender a contender? Or is that price so Crack Pipe this D90 could have been found in DJ-AM's apartment?

You decide!

eBay or go here if the ad disappears.

Help me out with NPOCP. Click here to send a me a tip, and remember to include your commenter handle.

Originally intended to house a 1,500 HP, 27-liter Rolls Royce Merlin engine (the same one found in a Spitfire), that exaggerated hood gives the Longnose its unique character. Sadly, the TUV didn't think a fighter engine would be safely employed as the motivation for a 1960s SUV with no airbags or antilock brakes, so we're instead stuck with a boring old Rover engine. Still, with the car weighing only 3,400 Lbs, that 300 Lb-Ft of torque should be enough to make drivers wish for a real windscreen.

Elsewhere on the Longnose you'll find a boat-style tail and a bunch of Olde English detailing, like leather hood straps and non-metallic paint. Which makes sense for a vehicle being produced by Ze Germans. We guess channeling TE Lawrence is more politically correct than recreating Erwin Rommel's staff car by putting a Panzer engine in it. In true Solihull via Asbach fashion, if you have to ask how much, you can't afford it. [Bell Aurens via Autoblog.nl]

The Triumph Mayflower ad, for a car James May condemns as the Ugliest Vehicle Ever Made, is especially puzzling. Did Triumph think that associating their products with some hookwormy clod pounding on a wagon wheel was a good idea?

Being a city boy, I'm no expert on the subject of vehicles made to slog through mud and/or help game wardens catch poachers (or at least look like they can do those things), and damn if I can come up with a decent ID on this out-of-town visitor. Clearly, it's had the crap modified out of it; the one-piece windshield suggests that it's a proto-Defender Land Rover 90, but it appears to have all manner of Series III pieces as well. Now's your time to shine, Land Rover experts! What do we have here?

Check out the selection of adventurer hats in the back!

J.D. Power And Associates ranks brands by the number of problems per 100 cars sold. The industry average is 108 problems per 100 vehicles (PP100), down from 118 the previous year. The best performers were Lexus (84 PP100), Porshce (90 PP100), Cadillac (91 PP100), Hyundai (95 PP100) and Honda (99 PP100). Domestic automakers Ford, Chevy and Mercury were all above the industry average, with Chrysler way down near the bottom at 136 PP100. The worst performance came from Mini, with a whopping 165 PP100. Full results below.

J.D. Power and Associates Reports:
Embattled U.S. Automakers Make Substantial Gains in Initial Quality,
Outpacing Industry-Wide Improvement

While Quality Gap Continues to Narrow, Import Nameplates Capture 15 of 22 Segment Awards

WESTLAKE VILLAGE, Calif.: 22 June 2009 - New vehicles sold by Chrysler, Ford and GM's domestic brands have improved in initial quality by an average of 10 percent, compared with 2008, surpassing the 8-percent rate of improvement by the industry overall, according to the J.D. Power and Associates 2009 Initial Quality StudySM (IQS) released today.

Overall, the industry average for initial quality is 108 problems per 100 vehicles (PP100) in 2009, down from 118 PP100 in 2008. Initial quality for domestic brands has improved to an average of 112 PP100 in 2009 from 124 PP100 in 2008. Lower PP100 scores indicate a lower rate of problem incidences and higher quality.

"Even in the face of unprecedented challenges, the Detroit automakers are keeping their focus on designing and building high-quality vehicles, which is a precondition for long-term success," said David Sargent, vice president of automotive research at J.D. Power and Associates. "High quality generally translates into reduced re-engineering costs and lower warranty expenses during a vehicle's life cycle. High quality also enhances an automaker's reputation for reliability, which is a critical purchase consideration for many consumers."

In addition to the marked improvement by domestic automakers, many import brands continued to perform well in 2009. Lexus leads the overall nameplate rankings, averaging 84 PP100. Following in the rankings are Porsche, Cadillac (which moves from 10th rank position in 2008 to third in 2009), Hyundai (improves from 13th rank position in 2008 to fourth in 2009) and Honda, rounding out the top five. Suzuki posts the largest improvement in ranking, moving from 32nd place in 2008 to ninth in 2009.

The study finds that initial quality for newly launched and redesigned models in 2009 has improved compared with previous years. Historically, all-new models have typically launched with below-average levels of initial quality. However, several all-new models in 2009, including the Hyundai Genesis, Kia Borrego, Toyota Venza and Volkswagen CC, perform considerably better than their respective segment averages. Many redesigned models in 2009 also show notable improvement from the previous generation-particularly the Acura TL, Ford F-150, Honda Pilot and Nissan Z.

"Achieving high levels of initial quality in all-new models is one of the greatest challenges for manufacturers," said Sargent. "Now that more manufacturers are getting their launch quality right straight out of the gate, consumers can expect the quality of new vehicles to continue to rise."

The Initial Quality Study serves as the industry benchmark for new-vehicle quality measured at 90 days of ownership. The study is used extensively by manufacturers worldwide to help them design and build better vehicles and by consumers to help them in their vehicle purchase decisions. Initial quality has been shown over the years to be an excellent predictor of long-term durability, which can significantly impact consumer purchase decisions. The study captures problems experienced by owners in two distinct categories-design-related problems and defects and malfunctions.

While the S1 won't win any style awards and doesn't offer the flexibility of an iPhone, it does allow you to fully submerge it in water up to 3.3 feet for 30 minutes with a pressure resistance of up to 400 kgs. Let's see your silly iPhone or Crackberry do that without a plexi-case. As well as offering extreme outdoor durability, the S1 packs a mighty punch in its feature list. A 2 mega-pixel waterproof camera with built-in flash, torch light, GPS, FM radio, 2GB memory slot, J2ME Java, Bluetooth and an Opera Mini WAP browser.

An extra-long life battery provides over 1500 hours of standby time with 18 hours of actual talk time, though we wonder how you're going to geta cell signal when you're out in the middle of nowhere. The Land Rover S1 mobile phone is available only in the UK at GoMobile stores for around $490.

The likelihood of a Land Rover owner actually needing an indestructible mobile phone seems limited to the rigorous shopping trek up and down Rodeo Drive, which we hear can get pretty wild.

This Land Rover in Worcester (the left-hand-drive steering wheel makes us assume that's the one in Massachusetts, not England) now has that special custom touch that really sets it apart from all the other beater trucks in the neighborhood. But why not go for the added class of brass? Thanks to Malik for the tip!

Press Release:

Unrivalled capabilty and dynamics from the 2010 Range Rover Sport.

• All-new efficient and powerful LR-V8 engines.
• LR-V8 5.0 liter Supercharged .
510 bhp and 461 lb/ft torque.
• 5.0-liter V8 naturally aspirated.
375 bhp and 375 lb/ft torque

• Striking exterior design changes create a more stylish and sporting look.
• Redesigned interior bringing new levels of refinement and craftsmanship.
• Steering wheel with paddle-shift gear change on Supercharged model.
• Chassis refinements including active damping, new brakes and updates to the Terrain ResponseTM system, bringing even greater breadth of capability.
• Cutting edge technologies including available surround camera system with tow assist, and a high beam assist option.

"The Range Rover Sport's performance, ride and handling have been transformed with the introduction of new engines, transmission and chassis systems. Combine these enhancements with the contemporary style and luxury of the revised interior, and it's clear that the Range Rover Sport remains the only choice as the quintessential SUV sports tourer," says Phil Popham, Land Rover Managing Director.

The Range Rover Sport reaffirms its status as the most exciting and dynamic member of the Land Rover range with a comprehensive package of engineering and design changes for the 2010 model year. The vehicle's stylish new appearance signals the transformation under the skin, which includes two powerful and efficient new engines - the LR-V8 naturally aspirated and LR-V8 5.0-liter Supercharged, enhanced levels of interior craftsmanship and refinement, and significant improvements to both on-road and off-road driving dynamics.

A comprehensive program of chassis system modifications has transformed the Range Rover Sport's on-road dynamics, while also delivering a substantial improvement in its off-road capabilities.

The introduction of new systems such as Adaptive Dynamics, working in conjunction with existing Dynamic Response on Supercharged models, and the addition of the road-focused Dynamic program to the Terrain ResponseTM system help enhance agility and ride quality. Further improvements to the Terrain ResponseTM system ensure that off-road capability is kept at the expected class-leading level.

The Range Rover Sport's stylish, muscular exterior has been updated to provide a cleaner, more sculpted feel. Striking signature LED headlamps combine with a new two-bar grille, front bumpers and fenders to create a more sporting and aerodynamic stance. At the rear, new light clusters and a revised bumper design mirror the smoother front-end.

The interior has been comprehensively redesigned, using higher quality materials, soft-touch finishes and superior craftsmanship to create a premium environment which is truly worthy of the Range Rover brand.
"The Range Rover Sport has generated a passionate following among customers who require the performance and refinement of a true sports tourer, but who value the formidable off-road ability of a Land Rover. Now that we have widened its range of capabilities even further, the following for the Range Rover Sport looks set to grow stronger still," says Phil Popham.

"Both the new LR-V8 engines are suited to the sporting character of the Range Rover Sport, providing generous low-end torque and spirited performance along with levels of refinement worthy of the Range Rover name." says Phil Hodgkinson, Product Development Director.

New engines deliver exceptional performance and refinement.
The most significant changes on the 2010 Range Rover Sport are to its powertrains. The vehicle benefits from two powerful new engines: 510bhp LR-V8 5.0-liter supercharged and a 375bhp LR-V8 5.0 liter naturally aspirated engine.

The LR-V8 engines are all-new and designed by the Jaguar Land Rover powertrain team using an impressive collection of state-of-the-art technologies. They were developed with an emphasis on delivering a smooth, refined and responsive performance, without a corresponding increase in fuel consumption. Both meet the stringent ULEV2 emissions standards.

"We have given the Range Rover Sport two truly state-of-the-art new powertrains. Each engine – whether supercharged or naturally aspirated – delivers outstanding performance and refinement."
Ron Lee, Group Chief Engineer, Powertrain.

The performance of the all-new naturally aspirated LR-V8 is now a virtual-match for the outgoing 4.2L supercharged engine The new naturally aspirated vehicle completes the 0-60 mph sprint in 7.2 seconds (just 0.1 seconds off the pace of the outgoing supercharged unit). For those who want the ultimate performance Range Rover Sport, there is now the all-new LR-V8 5.0L Supercharged, which is propelled from rest to 60 mph in an impressive 5.9 seconds.

The engines were developed in conjunction with Jaguar - the first time engines have been designed from the outset with the requirements of both brands in mind. Shared primary objectives included the highest possible torque and fast response from low revs.

Although the basic engine architecture is the same for each brand, Land Rover engine requirements differ to satisfy demanding all-terrain needs . For example, they feature a deeper sump to accommodate the extreme tilting angles that Range Rover Sport may be subjected to off-road. In addition, belt drives are waterproofed, as are the alternator, air conditioning compressor, power steering pump and starter motor.

All-new LR-V8 engines deliver outstanding performance and efficiency.
• All-new 5.0-liter V8 design with 510bhp SAE supercharged and 375bhp SAE naturally aspirated versions.
• 510bhp engine has 29 percent* more power and 12 percent* more torque than previous 4.2-liter supercharged engine.
• 375bhp engine has 25 percent* more power and 19 percent* more torque than previous 4.4-liter engine.
• Conforms to stringent ULEV2 emissions regulations.
• Multi-hole central spray-guided direct injection is highly efficient – industry first.
• High efficiency, 6th generation Eaton™ twin-vortex supercharger.
• Torque-actuated variable camshaft timing on all four cams in V8 engine – industry first.
• Camshaft profile switching and variable length inlet manifold optimizes power and torque.
• Reverse cooling improves engine efficiency and speeds cabin warm-up.
• Class-leading, low-friction design features.
• Lightweight construction uses recycled materials.
• 15,000 mile (24,000 km) service intervals.

Direct injection – increased power and torque, low emissions.
One of the key features of the new LR-V8 is an industry first, centrally-mounted, multi-hole, spray-guided fuel injection system, delivering fuel at a pressure of up to 150bar (2175 psi) directly to the cylinder. The positioning of the injectors ensures fuel is precisely delivered to the center of the combustion chamber, maximizing air-fuel mixing, and improving combustion control.

Fuel is delivered by twin, high pressure fuel pumps driven via an auxiliary shaft in the all new engine block. Delivery of fuel direct to the cylinder has substantially contributed to improved low speed, dynamic response which is particularly useful off-road while adding to driving pleasure on-road. The charge cooling effects of the direct injection fuel system have allowed the compression ratio of the naturally aspirated engine to be raised to 11.5:1, further improving the engine economy.

During the engine warm-up phase, the combustion system employs multiple injection mode strategies to deliver 50 percent more heat for fast catalyst warm-up and reduced emissions.

New variable camshaft timing system boosts engine torque, saves energy.
A new type of variable camshaft timing system (VCT) introduces another industry first. The four VCT units are activated by the positive and negative torques generated by opening and closing the intake and exhaust valves, instead of by oil pressure. This has allowed the engine oil pump to be reduced in size, saving energy and reducing fuel consumption.

VCT units work independently on all four camshafts with 62 degrees of authority on the inlet cams and 50 degrees of authority on the exhaust cams. Timing is optimized by the engine control unit for torque, power and economy at every point in the engine's speed range.

The response rate of the new VCT units is 25 percent higher than before with actuation rates in excess of 150 degrees per second. This delivers a more immediate engine response to the driver's demand.
6th generation supercharger – quieter and more efficient.

A sixth generation, Eaton™ twin vortex system (TVS) supercharger is fitted to the 510 bhp engine. A compact Roots-type unit it feeds air through twin intercoolers which in turn are water-cooled by their own cooling circuit. The high helix rotor design both improves the supercharger thermodynamic efficiency by 16 percent. It also improves noise quality to the point where the unit is now almost inaudible. The intercoolers reduce the temperature of the pressurised intake-air and so optimize power.

The air intake has been radically redesigned compared to the previous V8. The intake air path is a direct feed to the supercharger inlet from the centrally mounted front throttle body. Air is delivered through twin air boxes which reduce flow loss and further increase efficiency. Mechanically, the new supercharger and its intercoolers are efficiently packaged in the V of the engine to deliver a low overall engine height.

Warm up quickly with reverse flow cooling.
The search for greater efficiency has in some areas led to a complete rethink of fundamental engine design concepts. An example is the innovative reverse flow cooling system which delivers thermodynamic and friction improvements. The new design means coolant is pumped through the cylinder heads before flowing through the block and returning to the radiator. Since the cylinder heads remain cooler, the knock threshold is pushed back allowing greater optimization of ignition timing for improved efficiency.

In addition, the 22 kW oil to water heat exchanger, packaged at the core of the engine, transfers heat from the coolant to the lubricating oil during warm up, bringing the oil up to operating temperature 14 percent faster than the previous cooling system. This 'reverse flow' approach substantially improves fuel consumption in the crucial engine warm-up period and helps warm the cabin more quickly.

Strong and compact.
The new LR-V8 engines are built around a stiff, all new, aluminium block with cast-in iron liners and cross-bolted main bearing caps, to reduce noise, vibration and harshness. For the first time at Land Rover, the blocks are high pressure die-cast rather than sand-cast, providing a superior finish and dimensional greater accuracy. The engines also have aluminium heads, with four-valves per cylinder and strong, spheroidal-graphite cast-iron crankshafts and steel connecting rods. The cylinder heads and blocks are manufactured using recycled aluminum alloy for the first time, thus reducing the environmental impact of manufacturing the new engines.
The new direct injection engine is more compact than its predecessor. Overall engine length has been reduced by relocation of the oil pump within the engine architecture.

Reduced internal friction combats CO2.
Internal friction, a major contributor to increased fuel consumption and CO2 emissions, has been targeted by careful design of the engines' components. As a result, the Range Rover Sport's new LR-V8 achieves another best in class, for crank train friction.

All engine bearings were the subject of an extensive optimization, reducing friction without compromising reliability. Diamond-Like Carbon coating (DLC) has been used to reduce friction on the fuel pump tappets and a solid film lubricant has been used to coat the piston skirts.

Land Rover has developed a unique, intelligent oil-pump pressure relief valve (PRV) which senses oil pressure deep in the engine's oil galleries to more accurately control oil pump delivery. As a result, oil pump frictional losses are reduced during the warm-up period.

The engine has also been designed around a 5W-20 semi-synthetic oil. The new oil has a lower viscosity, primarily at low temperatures, reducing parasitic losses in the engines and contributing to an extension in service intervals from 7,500 miles to 15,000 miles or 12 months. The new LR-V8 engine is also fitted with an electronic oil level indicator for added peace of mind.

Responsive new transmission.
Both LR-V8 engines on the Range Rover Sport are mated to the revised and super-smooth ZF HP28 6-speed automatic transmission. Its characteristics have been optimized by Land Rover engineers to provide class-leading response, with rapid and refined shifts. The dramatic enhancement of both power and torque low down the rev range on the new engines have made it possible to actuate the transmission's lock-up clutch much earlier in each gear, reducing slip through the hydraulic torque converter, so helping with improvement in both fuel consumption and CO2 emissions.

The transmission features an intelligent sport mode, which can sense and adapt transmission characteristics to particular driving styles. For the first time on the Range Rover Sport Supercharged, the driver can change gears manually with a steering wheel mounted paddle-shift.

Transformed vehicle dynamics
A comprehensive program of chassis refinements has been introduced to the Range Rover Sport for 2010. The enhancements transform the dynamics and handling characteristics of the vehicle, allowing drivers to fully exploit the capabilities of the new, high performance engine line-up.

Adaptive Dynamics system
The 2010 Range Rover Sport features a new Adaptive Dynamics System, which works in conjunction with the existing Dynamic Response system to enhance control of the vehicle's ride and handling.

Land Rover has employed the world's first production system for this computer model-based predictive technology, which continually optimizes damper settings for the widest possible range of conditions. Conventional dampers are replaced by precision DampTronic Valve Technology™ damper units, which incorporate continually adjustable damper-valves.

The predictive technology enables damper settings on each wheel to be continuously refined between 'soft', comfort oriented settings and 'hard', firm body control settings; damper pressure on each wheel is monitored 500 times per second. The system optimizes the vehicle's body and ride control, instantly responding to both the demands of the prevailing driving style and of the terrain encountered, in both on and off-road situations.
Greater driver involvement through the wheel.

Steering response is improved on the Range Rover Sport with the stiffening of the front suspension lower arm forward bushing, enhancing the sense of driver involvement with the vehicle at higher speeds.

The revised variable ratio steering rack complements this by improving stability at high speed cruising – and increasing sensitivity at higher lock angles.

Braking system gets more power and feel.
The Range Rover Sport is equipped with a new braking system which has been comprehensively updated to provide enhanced stopping power and improved driver feel.

The brakes for the naturally aspirated vehicle are modelled on the 4-piston opposed caliper performance system from the outgoing Supercharged model. The updated system employs 14.2-inch (360mm) ventilated front discs with new twin piston sliding cast-iron calipers for enhanced pedal feel. The rear features 13.8-inch (350mm) ventilated discs with lightweight aluminum single piston sliding calipers.

The braking system for the Supercharged model has been developed in conjunction with performance brake specialists Brembo™. This system employs 15-inch (380mm) ventilated front discs with unique lightweight aluminum six-piston opposed action monoblock calipers. 14.3-inch (365mm) ventilated discs with single piston sliding calipers are fitted at the rear.

Enhanced emergency braking.
Models fitted with the Adaptive Cruise Control option also benefit from a new Advanced Emergency Brake Assist system, which is designed to detect the driver's responses to a potential emergency situation.

Working in conjunction with the Forward Alert System's radar, Advanced Emergency Brake Assist primes the vehicle's braking system, and even initiates braking in extreme circumstances if a collision is judged possible. Valuable improvements in braking distances have been recorded in the testing of this system.

Greater control and safety around corners.
A refinement to the dynamic stability control system helps automatically slow the vehicle if taking a corner too fast, thus enhancing driver control.

The system operates according to steering inputs from the driver. In extreme cases, automatic braking intervenes to help reduce the vehicle speed, with the braking pressure level applied according to the steering inputs.

This feature is complemented by the new Roll Stability Control system, which is designed to intervene in the unlikely case of an extreme situation in which the possible onset of a rollover is detected. In such situations, the system is designed to take over and perform very rapid, wheel specific braking, to help reduce speed and marginally widen the cornering radius.

In more extreme cases the system is designed to initiate marginal understeer by sharply increasing brake force on the outer wheels, again widening the turning radius.

Updates for award-winning Terrain ResponseTM and Hill Descent Control.
For the 2010 Range Rover Sport, Land Rover's award-winning Terrain ResponseTM system gains new features and refinements, further extending the vehicle's all-terrain capability.
Most significantly, the Terrain ResponseTM system now includes a new 'Dynamic' program, designed for sporting on-road driving.

Dynamic program delivers a responsive driving experience.
When the driver selects the new Dynamic program, the Terrain Response™ system tailors the vehicles chassis and powertrain settings to deliver a more sporting and responsive driving experience. Tighter body control and quicker steering responses are achieved by adjustments to the Adaptive Dynamics system, while the accelerator pedal mapping, dynamic stability control system and gear-change settings are also given more sporting characteristics.

The Dynamic program has also been specially tuned to take advantage of chassis changes to the supercharged model which is designed to deliver improved driver confidence at higher speeds. The changes include a 20% stiffer rear roll control bar, and further revisions to the steering system, suspension bushings and wheel alignment settings.

Coping with tougher conditions.
For soft sand – one of the most power-hungry surfaces – 'sand launch control' has now been introduced, which makes for noticeably easier drive-away. New, speed-dependent wheel-slip targets for the traction control system permit only very limited initial wheel-slip, helping to prevent the wheels digging down into the sand.

New for Range Rover Sport, revisions to the rock crawl program improve brake and traction control response times, helping to reduce the vehicle's wheels rolling in an unintended direction when traversing boulders, and giving a more composed drive through rocky terrain.

Land Rover's much-acclaimed Hill Descent Control system is enhanced on the latest Range Rover Sport with the addition of Gradient Release Control. This inhibits the initial rate of acceleration when descending very steep inclines, to increase control when braking is released at extreme angles.

More sporting design for a more sporting vehicle.
"We have given the Range Rover Sport a cleaner, more muscular appearance which is the perfect complement to its new range of high performance engines. Striking new signature LED headlamps, a two-bar grille and a larger air intake create a bold new frontal graphic which helps to reinforce the vehicle's athletic stance."
Design director, Gerry McGovern

The new design theme for the 2010 Range Rover Sport emphasises its position as the most dynamic model in the Land Rover range, creating a sporting, cleaner and more sculpted appearance.

At the front, new signature LED headlamps provide a technical focal point, and feature Range Rover inspired interlocking circle lamps. With a new two-bar grille and larger air intake, the vehicle's frontal graphic is much more slim, athletic and low-slung.

The new front bumper blends with redesigned front fenders to form a simple, sculpted surface, offering improved aerodynamics and a lower, more sporting visual stance.

The side view of the vehicle features new two-stripe LED indicators, along with redesigned two-section fender vents. Color coded door mirrors complete the visual changes.

At the rear, Range Rover inspired light clusters create a fresh new look, while the smooth and sculpted bumper design mirrors the style of the front-end.

New front wheel deflectors help reduce drag and new 19 and 20-inch tires are available on Range Rover Sport, optimized for rolling resistance and improved tire wear.

Premium interior environment.
The interior has been comprehensively redesigned, and features significantly improved standards of quality and craftsmanship.

The cabin retains its popular cockpit feel but incorporates higher quality materials, sumptuous soft-touch finishes and superb detailing throughout the interior. Leather is used extensively on major surfaces, in a wider choice of colors. To create a more sporting feel, rich dark shades 'sandwich' narrow sections in lighter tones, and the effect is completed by a generous selection of stylish wood finishes.

The soft-touch fascia is all new, with a smooth and clean-looking design that can be wrapped in stitched, premium grade European leather. It features an architectural beam that runs across the width of the cabin, supported by natural wood finish pillars.

To enhance the clean look of the interior, the fascia now has 50 percent fewer switches; the switches themselves now feature noble accents. The signature roller-shutter cup-holder cover is now finished in a high-quality metallic sheen.

There are new seats front and rear, which feature a deeper, more sculpted shape; electrically adjustable side bolsters are available on the front seats for the first time.

New ambient lighting adds to the premium qualities of the cabin, with the introduction of white LEDs to cast subtle halos around interior door handles and pockets, as well as on the fascia and center console area.

Cutting edge vehicle technologies.
"The 2010 Range Rover Sport features a host of new technologies that will really enhance the driving and ownership experience for our customers. But in each case the complexity is hidden from view – we've made every system intuitive and simple to use."
Stuart Frith, Chief Program Engineer.

The latest Range Rover Sport incorporates a comprehensive range of state-of-the-art technologies, designed to improve comfort, convenience, safety and security for all vehicle occupants.

Infotainment systems and displays.
A new hard-drive navigation system provides faster route calculation and improved system reliability.
The navigation system adopts an easy-to-use navigation structure which now also features 'towards guidance.' This supplements the junction map and icon-based information with details of the actual road signage viewed by the driver along the route.

The new Portable Audio Interface allows connectivity to an array of personal audio storage devices, USB sticks and MP3 players, enabling the various devices' functions to be accessed and controlled via the facia-mounted touch-screen system. One of the connectivity ports is a dedicated iPodTM point made exclusively by Land Rover, for continued functionality in extreme driving conditions, by helping to prevent the device coming loose from the socket.

A new 5-inch Thin Film Transistor (TFT) driver information screen is also introduced with the 2010 Range Rover Sport. Sitting within the instrument cluster, the message center display ensures key information is communicated in a clean, simple and user-friendly manner.

Improving safety and security.
Outside the vehicle, convenient and relevant new systems enhance safety and security.
The Range Rover Sport now offers a sophisticated new remote key which offers both Keyless Entry and Push Button Start.

A new Surround Camera System supports easier parking and towing. It features five digital cameras which relay a near 360-degree view to the touch-screen display. The cameras function immediately as the vehicle is started, and have options for selecting and zooming in to assist with close quarter parking and with towing.

The patented reverse 'tow assist' and tow hitch assist functions (selected from the touch screen menu) help perform accurate towing maneuvers. The wide fields of vision on the side cameras give a clear view of the reversing trailer and the images are electronically manipulated to provide an undistorted view. Guide lines overlaid on the rear camera image illustrate both the vehicle and trailer's trajectory and these move in line with steering inputs, making it easier for the driver to predict where the trailer will move to, before performing the reversing maneuver.

Specific characteristics such as type of trailer, number of axles and width guides can be fed into the system to enhance the system outputs.

The Range Rover Sport's new LED front headlights incorporate available High Beam Assist technology. This can automatically switch on high beam headlights where external light levels are below the system's threshold. Importantly, the system is also designed to detect preceding and approaching traffic, and in a split second will automatically switch back to low beam to avoid dazzling others.

The Press Release Follows:

Land Rover's most complete luxury all-terrain vehicle just got better: the new 2010 Range Rover

*All-new efficient and powerful LR-V8 engines
*5.0-liter V8 supercharged
o510 bhp and 461 lb/ft torque
*5.0-liter V8 naturally aspirated
o375 bhp and 375 lb/ft torque
*Subtle exterior design changes enhance the classic Range Rover design with contemporary details
*Upgraded interior, featuring physical instrument cluster replaced by 12" Thin Film Transistor (TFT) screen with 'virtual' dials and information displays
*State-of-the-art Adaptive Dynamics technology to further improve the Range Rover's peerless ride quality
* New brakes for all engine derivatives
*Updated Terrain Response™ and Dynamic Stability Control System for all-terrain performance
*Active safety aids including Adaptive Cruise Control, Emergency Brake Assist, available Blind Spot Monitoring and Surround Camera system

Powerful new engines, advanced interior technologies and enhanced driving dynamics reinforce the position of the 2010 Range Rover as Land Rover's most complete luxury all-terrain vehicle. Land Rover's flagship has been comprehensively updated to deliver more refined and efficient performance, along with the ultimate in interior comfort and craftsmanship.

"The 2010 Range Rover is a considerable step forward for what is already regarded as the one of the world's most complete luxury vehicles. New engines deliver formidable power, efficiency and customary Range Rover refinement, and new technologies, such as the 12" TFT instrument cluster. The 2010 Range Rover remains the benchmark and continues to set the pace in its segment," says Phil Popham, Land Rover Managing Director.

The 2010 Range Rover has two brand new 5.0-liter LR-V8 engines – the top of the range 510 bhp supercharged unit, and the 375 bhp naturally aspirated version. Both engines were developed in-house by the Jaguar Land Rover powertrain team, with the requirements of the Range Rover in mind from day one.

The LR-V8 engines have been developed to deliver more power and refinement but without a corresponding increase in consumption and emissions. The result is a pair of lightweight direct fuel injection engines with class-leading efficiency, which provide significantly more usable low end torque and superior dynamic responses without compromising power at higher RPM. Both engines are compliant with stringent U.S. ULEV2 emissions regulations.

The performance of the all-new naturally aspirated LR-V8 is now a virtual-match for the outgoing 4.2L supercharged engine. The new naturally aspirated vehicle completes the 0-60 mph sprint in 7.2 seconds (just 0.1 seconds off the pace of the outgoing supercharged unit). For those who want the ultimate performance Range Rover, there is now the all-new LR-V8 5.0L Supercharged, which is propelled from rest to 60 mph in an impressive 5.9 seconds.

The 2010 improvements include subtle exterior revisions, featuring discrete changes to the headlights, grille and bumper which enhance the classic Range Rover design with more contemporary detailing. The interior benefits from more luxurious materials and finishes which add further refinements to the premium cabin ambiance.

More significantly, the 2010 Range Rover uses some revolutionary new interior technologies which enhance the experience for both driver and passengers alike.

A dramatic innovation is found in the instrument cluster. Here, traditional physical instruments are replaced by a 12" Thin Film Transistor screen which presents all essential driver information via cleverly designed 'virtual' dials and graphical displays.

"The new display technology used by the 2010 Range Rover is a major advance. It gives us tremendous flexibility in presenting information, so that the driver gets precisely the data they require, in all driving conditions," explains Nick Rogers, Chief Engineer, New Vehicle Architecture.

The vehicle incorporates state-of-the-art Adaptive Dynamics technology (optional on LR-V8 naturally aspirated) to further improve the Range Rover's peerless ride quality. All-terrain performance is also enhanced by updates to the Terrain Response™ and Stability Control systems.

To complete the package, the 2010 Range Rover benefits from a series of enhanced active safety aids including Adaptive Cruise Control, Emergency Brake Assist, Blind Spot Monitoring, available Automatic High Beam Assist (AHBA) and an available surround camera system.

"The Range Rover remains the consummate luxury SUV . Its combination of unrivalled all-terrain performance with the ultimate in comfort and refinement, remains a clear industry benchmark," says Phil Popham.

All-new LR-V8 engines deliver outstanding performance and efficiency

*

All-new 5.0-liter V8 design with 510bhp SAE supercharged and 375bhp SAE naturally aspirated versions
*

510bhp engine has 31 percent more power and 12 percent more torque than previous 4.2-liter supercharged engine
*

375bhp engine has 25 percent more power and 19 percent more torque than previous 4.4-liter engine
*

Conforms to stringent ULEV2 emissions regulations
*

Multi-hole central spray-guided direct injection is highly efficient – industry first.
*

High efficiency, 6th generation Eaton™ twin-vortex supercharger
*

Torque-actuated variable camshaft timing on all four cams in V8 engine – industry first
*

Camshaft profile switching and variable length inlet manifold optimzes power and torque
*

Reverse cooling improves engine efficiency and speeds cabin warm-up
*

Class-leading, low-friction design features
*

Lightweight construction uses recycled materials
*

15,000 mile (24,000 km) service intervals

"Both versions of the V8 return impressive levels of power and torque combined with optimized fuel consumption and emissions – the supercharged 5.0-liter engine is one of the most fuel efficient in its class. As well as stunning top-end performance, they also deliver the low-end flexibility essential for real-world driving."

Malcolm Sandford, Engine Group Chief Engineer, Land Rover

The Range Rover gets an all-new engine line up with a choice of two 5.0-liter LR-V8 units in supercharged and naturally aspirated guise. The two engines were developed in conjunction with Jaguar, which is the first time engines have been designed from the onset with the requirements of both brands in mind. Shared primary objectives included the highest possible torque and fast response from low revs.

Although the basic engine architecture of both engines is the same for each brand, Land Rover engine requirements differ to satisfy demanding all-terrain needs. For example, the engines feature a deeper sump to accommodate the extreme tilting angles experienced when driving the Range Rover off-road, and to accommodate the front differential which attaches to it. In addition, belt drives are waterproofed, as are the alternator, air conditioning compressor, power steering pump and starter motor.

The supremely powerful supercharged LR-V8 delivers 510 bhp and 461 lb/ft of torque, while the naturally aspirated version produces 375 bhp and 375 lb/ft of torque. Two of the most advanced engines ever built, they are packed with innovative features to ensure that they are also two of the most efficient in their class.

Both derivatives were developed with an emphasis on delivering a smooth, refined and responsive driver experience, with excellent power characteristics. Compared to the current 4.2-liter V8 the supercharged engine increases power and torque outputs by 29 percent and 12 percent respectively.

Yet when it comes to regulated emissions both engines are incredibly clean, meeting the stringent American ULEV2 (ultra low emissions vehicle) regulations.

Direct injection – increased power and torque, lower emissions

One of the key features of the new LR-V8 is an industry first, centrally-mounted, multi-hole, spray-guided fuel injection system, delivering fuel at a pressure of up to 150bar (2,175 psi) directly to the cylinder. The positioning of the injectors ensures fuel is precisely delivered to the center of the combustion chamber, maximizing air-fuel mixing, and improving combustion control.

Fuel is delivered by twin, high pressure fuel pumps driven via an auxiliary shaft in the all new engine block. Delivery of fuel direct to the cylinder has substantially contributed to improved low speed, dynamic response which is particularly useful off-road while adding to driving pleasure on-road. The charge cooling effects of the direct injection fuel system have allowed the compression ratio of the naturally aspirated engine to be raised to 11.5:1, further improving the engine efficiency.

During the engine warm-up phase, the combustion system employs multiple injection mode strategies to deliver 50 percent more heat for fast catalyst warm-up and reduced emissions.

6th generation Eaton™ supercharger – quieter and more efficient.

A sixth generation, Eaton™ twin vortex system (TVS) supercharger is fitted to the 510 bhp engine. A compact Roots-type unit, it feeds air through twin intercoolers which in turn are water-cooled by their own cooling circuit. The high helix rotor design both improves the supercharger thermodynamic efficiency and improves noise quality to the point where the unit is virtually inaudible. The intercoolers reduce the temperature of the pressurized intake-air and so optimize power.

The air intake has been radically redesigned compared to the previous V8. The intake air path is a direct feed to the supercharger inlet from the centrally mounted front throttle body. Air is delivered through twin air boxes which reduce flow loss and further increase efficiency. Mechanically, the new supercharger and its intercoolers are efficiently packaged in the V of the engine to deliver a low overall engine height.

New variable camshaft timing system boosts engine torque, saves energy

A new type of variable camshaft timing system (VCT) on the V8 engine introduces another industry first. The four VCT units are activated by the positive and negative torques generated by opening and closing the intake and exhaust valves, instead of by oil pressure. This has allowed the engine oil pump to be reduced in size, saving energy and reducing fuel consumption.

VCT units work independently on all four camshafts with 62 degrees of authority on the inlet cams and 50 degrees of authority on the exhaust cams. Timing is optimized by the engine control unit for torque, power and efficiency at every point in the engine's speed range.

The response rate of the new VCT units is 25 percent quicker than before with actuation rates in excess of 250 degrees per second. This delivers a more immediate engine response to the driver's demand.

Camshaft profile switching – flexibility with performance

In addition to VCT, the naturally aspirated LR-V8 is also equipped with camshaft profile switching (CPS) on the inlet camshaft. Depending on the engine's running conditions and the requirements of the driver, the CPS will switch between a profile that is ideal for low speed driving, and another which gives increased valve lift for high performance. This feature helps endow the Range Rover with ample low end torque in demanding terrain, yet fully exploits the potential of the 5.0-liter V8 when conditions allow.

An hydraulically-actuated two-piece tappet switches between profiles on the tri-lobe camshaft altering both the lift and duration. The cam lobe profile selected for engine speeds below 3000 rpm has a duration of 214 degrees and lifts the valves 5.5mm. This optimizes gas velocity for improved low-speed torque and reduces valve train friction for improved fuel efficiency. For high-speed driving, CPS switches to a cam lobe with a duration of 250 degrees and valve-lift of 10.5mm, allowing greater air flow into the engine for high power.

Variable Inlet Manifold (VIM) optimizes power and torque

Complementing VCT and CPS on the naturally aspirated LR-V8 is a new variable inlet manifold (VIM) which can vary the length of its eight inlet tracts to optimize power and torque throughout the rev range. As a consequence, the engine can develop the maximum possible low-end torque yet breathe well enough to develop the maximum possible power at high rpm. Vacuum operated actuators open valves to select a longer, 680mm, inlet tract at low revs, increasing the rate of both the airflow and the engine torque. As the revs climb beyond 4,700rpm, the actuators select a shorter, 350mm, path allowing a greater volume of air into the engine for higher power. The actuator position is continually optimized by the engine control unit for torque and efficiency throughout the engine speed range.

Warm up quickly with reverse flow cooling

The search for greater efficiency has in some areas led to a complete rethink of fundamental engine design concepts. An example is the innovative reverse flow cooling system which delivers thermodynamic and friction improvements. The new design means coolant is pumped through the cylinder heads before flowing through the block and returning to the radiator. Since the cylinder heads remain cooler, the knock threshold is pushed back allowing greater optimization of ignition timing for improved efficiency.

In addition, the 22 kW oil to water heat exchanger, packaged at the core of the engine, transfers heat from the coolant to the lubricating oil during warm up, bringing the oil up to operating temperature 14 percent faster than the previous cooling system. This 'reverse flow' approach substantially improves fuel consumption in the crucial engine warm-up period and helps warm the cabin more quickly.

Strong and compact

The new LR-V8 engines are built around a stiff, all new, aluminum block with cast-in iron liners and cross-bolted main bearing caps, to reduce noise, vibration and harshness. For the first time at Land Rover, the blocks are high pressure die-cast rather than sand-cast, providing a superior finish and dimensional greater accuracy. The engines also have aluminum heads, with four-valves per cylinder and strong, spheroidal-graphite cast-iron crankshafts and steel connecting rods. The cylinder heads and blocks are manufactured using recycled aluminum alloy for the first time, thus reducing the environmental impact of manufacturing the new engine.

The new direct injection engines are more compact than their predecessors. Overall engine length has been reduced by relocation of the oil pump within the engine architecture. Overall engine weight (fully dressed with all ancillaries) is 210kg for the naturally aspirated unit and 236kg for the supercharged unit.

Reduced internal friction combats CO2

Internal friction, a major contributor to increased fuel consumption and CO2 emissions, has been targeted by careful design of the engines' components. As a result, the Range Rover's new LR-V8s achieve another best in class for crank train friction.

All engine bearings were the subject of an extensive optimization, reducing friction without compromising reliability. Diamond-Like Carbon Coating (DLC) has been used to reduce friction on the fuel pump tappets and a solid film lubricant has been used to coat the piston skirts.

Land Rover has developed a unique, intelligent oil-pump pressure relief valve (PRV) which senses oil pressure deep in the engine's oil galleries to more accurately control oil pump delivery. As a result, oil pump frictional losses are reduced during the warm-up period.

The engines have also been designed around a 5W-20 synthetic oil. The new oil has a lower viscosity, primarily at low temperatures, reducing parasitic losses in the engines and contributing to an extension in service intervals from 7,500 miles to 15,000 miles or 12 months. The new LR-V8 engines are also fitted with an electronic dipstick for added peace of mind.

Responsive new transmission

The 2010 Range Rover's new engines are mated to the revised and super-smooth ZF HP28 6-speed automatic transmission. Its characteristics have been optimized by Land Rover engineers to provide rapid and refined shifts. The dramatic enhancement of both power and torque low down the rev range on the new engines have made it possible to actuate the transmission's lock-up clutch much earlier in each gear, reducing slip through the hydraulic torque converter, so helping with the improvements in both fuel consumption and CO2 emissions.

The transmission features an intelligent sport mode, which can sense and adapt transmission characteristics to particular driving styles.

Enhanced vehicle dynamics – both on- and off-road

The 2010 Range Rover benefits from a comprehensive program of refinements to its vehicle dynamics. The enhancements include features that will improve ride and handling during on-road driving, plus a series of measures that give greater capabilities when driving off-road or when towing.

Unique adaptive dynamics system improves ride and control

The 2010 Range Rover has an advanced new Adaptive Dynamics system which further improves the Range Rover's peerless ride quality with greater refinement and superior body control.

It is the world's first production system to employ model-based predictive technology that continually optimizes damper settings for the widest possible range of conditions. Conventional dampers are replaced by precision DampTronic Valve Technology™ damper units, which incorporate continually adjustable damper valves.

The predictive technology enables damper settings on each wheel to be continuously refined between 'soft', comfort oriented settings and 'hard', firm body control settings; damper pressure on each wheel is monitored 500 times per second. The system optimizes the vehicle's body and ride control, instantly responding to both the demands of the prevailing driving style and of the terrain encountered, in both on- and off-road situations.

Braking system gets more power and feel

The Range Rover is equipped with a new braking system which has been comprehensively updated to provide enhanced stopping power and improved driver feel.

The brakes for the naturally aspirated vehicle are based on the four-piston opposed caliper performance system from the outgoing Supercharged model. The updated system employs 14.2-inch (360mm) ventilated front discs with new twin piston cast-iron sliding calipers for enhanced pedal feel.

The rear features 13.8-inch (350mm) ventilated discs with lightweight aluminum single piston sliding calipers.

The braking system for the Supercharged model has been developed with performance brake specialists Brembo™. This system employs 15-inch (380mm) ventilated front discs with unique lightweight aluminum six-piston opposed action monoblock calipers. 14.3-inch (365mm) ventilated discs with single-piston sliding calipers are fitted at the rear.

Greater control and safety around corners

A refinement to the stability control system helps automatically slow the vehicle if taking a corner too fast, thus enhancing driver control.

Enhanced Dynamic Stability Control interfaces with the brake modulator and powertrain control module. If the speed is too great for engine torque reduction to control the vehicle, automatic braking intervenes to reduce the vehicle speed, with braking pressure applied according to the severity of the situation. At decelerations in excess of 0.7g the brake lights are automatically applied to warn following traffic.

This feature is complemented by the new Roll Stability Control system, which is designed to intervene in the unlikely case of an extreme situation in which the possible onset of a rollover is detected. In such situations, the system is designed to take over and perform very rapid, wheel specific braking, to help reduce speed and marginally widen the cornering radius.

Improved performance and stability off-road

The award winning Terrain Response™ system is subject to a whole series of improvements, including enhanced capabilities when tackling challenging terrain like sand or large rocks.

For soft sand – one of the most power-hungry surfaces – 'sand launch control' has now been introduced, which makes for noticeably easier drive-away. New, speed-dependent wheel-slip targets for the traction control system permit only very limited initial wheel-slip, helping to prevent the wheels digging down into the sand.

New for Range Rover, revisions to the rock crawl program improve brake and traction control response times, helping to reduce the wheels rolling in an unintended direction when traversing boulders, and giving a more composed drive through rocky terrain.

Land Rover's much-acclaimed Hill Descent Control system is enhanced on the latest Range Rover with the addition of Gradient Release Control. This inhibits the initial rate of acceleration for descending very steep inclines, to increase control when braking is released at extreme angles.

More stable towing

For safer and more stable towing, the 2010 Range Rover incorporates Trailer Stability Assist. This system detects trailer oscillations by monitoring key vehicle behaviors, such as uninvited steering movements and slight vehicle swing in response to trailer behavior. In these circumstances, the system can initiate engine torque reduction and braking interventions to help bring the towing back under control.

Classic Range Rover style with contemporary details

"We have introduced a number of more contemporary design elements on the 2010 Range Rover, but have been careful not to disturb the vehicle's classic proportions and unique silhouette. The refined detailing and cleaner surfaces of the 2010 model retain the timeless and noble qualities which are traditional hallmarks of Range Rover design."

Design Director, Gerry McGovern

The 2010 Range Rover features subtle revisions to the exterior design, introducing some attractive new design elements which enhance the classic Range Rover style with more contemporary detailing.

New headlights feature the Range Rover's trademark inter-locking circle design, but are more clearly visible, day or night, with LED lamp technology. The headlights are marginally shallower, and 'bookend' a deeper, more upright mesh grille.

A new bumper completes the smoother, more sculpted front end, reflecting the clean surface integration which is now characteristic of Range Rover design. The fog lamps are relocated from the bumper skin to the lower front air-intake.

The side of the vehicle features new 'three-stripe' LED indicators and redesigned three-section fender vents. The same design theme is adopted by the rear LED light clusters, which incorporate 'three-stripe' directional indicators.

Interior showcases luxurious materials and revolutionary technologies

Superbly crafted new materials and some revolutionary display technologies help to improve a cabin that is already widely regarded as one of the automotive world's finest.

To further enhance the premium interior ambience, the 2010 Range Rover introduces new luxury grade European leather trim for the headlining, pillar and door casings. Fascia buttons now feature a satin chrome-plated finish, which are beautifully highlighted by the Range Rover's upgraded waterfall interior lighting. High quality satin black and natural wood finishes complete the sumptuous feel of the interior architecture.

'Virtual' dials and graphic displays replace traditional instruments

One of the major innovations in the 2010 Range Rover is found in the instrument cluster. Here, traditional physical instruments are replaced by a 12" Thin Film Transistor screen which presents all essential driver information via cleverly designed 'virtual' dials and graphical displays.

The system's message center (the area between rev counter and speedometer) can be customized by the driver to display personal prioritized information, from system warnings, outside temperature and vehicle information to less critical data such as audio and telephone displays.

The message center also relays off-road information, such as steering angle, wheel articulation, suspension settings and Terrain Response™ settings.

Fingertip control of settings and menus on the TFT screen is provided by an updated steering wheel which incorporates a five-way controller.

Update Touch-screen Technology

The touch-screen retains all the functionality of the previous display, but the graphics and menus have been redesigned for easier and more intuitive operation, allowing the number of 'hard' buttons around the screen to be reduced by a third. As before, functions such as satellite navigation, DVD video, and audio systems can be controlled via the display.

An updated voice control system with enhanced voice recognition software complements the touch screen, and can be used to control a range of entertainment and comfort features such as the audio system and climate control.

Advanced vehicle technologies enhance convenience and safety

"The technologies built into the 2010 Range Rover are designed to improve convenience and safety, reducing the stress of driving in modern motoring conditions, on all terrains. With technology sharing the workload, the result is a more relaxed, alert driver."

Paul Walker, Chief Program Engineer

The 2010 Range Rover incorporates a comprehensive selection of advanced vehicle technologies which enhance convenience and improve active safety for the driver.

Adaptive Cruise Control

The 2010 Range Rover features Land Rover's Adaptive Cruise Control system (ACC) for the first time. The system employs a 76GHz scanning radar to locate vehicles moving in the same direction, and is designed to maintain optimal vehicle speed by using acceleration, deceleration and braking to keep a specified distance from the traffic ahead.

ACC comes with four driver-selectable settings, designed to suit individual driving style and traffic / road conditions. The driver can select a 'headway' of between 1 to 2.2 seconds, with a default setting of 1.8 seconds; this equates to a 50 meter distance from the vehicle ahead when travelling at 62 mph (100km/h). The system is designed to operate at speeds of up to 112 mph (180km/h).

Vehicles fitted with the ACC system also benefit from a new Advanced Emergency Brake Assist system. Working in conjunction with the Forward Alert System's radar, this primes the vehicle's braking system, and even initiates braking in extreme circumstances if a collision is judged possible. Valuable improvements in braking distances have been recorded in the testing of this system.

Updated infotainment systems

A new hard-drive navigation system provides faster route calculation, larger area map coverage and improved reliability. The navigation system adopts an improved navigation structure which now also features 'towards guidance'. This supplements the junction map and icon-based information with details of the actual road signage viewed by the driver along the route.

The available new Portable Audio Interface allows connectivity to an array of personal audio storage devices, USB sticks and MP3 players, enabling the various devices' functions to be accessed and controlled via the fascia-mounted touch-screen system. One of the connectivity ports is a dedicated iPodTM point made exclusively by Land Rover, for continued functionality in extreme driving conditions, by helping to prevent the device coming loose from the socket.

And a purer, crisper radio sound is now available thanks to the introduction of an optional HD Radio in the U.S. Along with the fine listening experience, come additional features such as song title and artist information.

Enhanced safety and visibility

The 2010 Range Rover has a blind spot monitoring system available which uses side-mounted radar sensors to detect vehicles and other solid objects in the vehicle's blind spot area. If an object is detected, a bright amber warning icon is illuminated in the driver's door mirror.

Available as an option, is a new Surround Camera system which supports easier parking, towing and off-road maneuvering. It features five digital cameras which relay a near 360-degree view to the touch-screen display. The cameras function immediately as the vehicle is started, and have options for selecting and zooming in to assist with close quarter parking and with towing.

The patented 'reverse tow assist' function (selected from the touch-screen menu) helps perform accurate towing maneuvers. The wide fields of view on the side cameras give a clear view of the reversing trailer and the images are electronically manipulated to provide an undistorted view. Guide lines overlaid on the rear camera image illustrate both the vehicle and trailer's trajectory and these move in line with steering inputs, making it easier for the driver to predict where the trailer will move to, before performing the reversing maneuver.

Specific characteristics such as type of trailer, number of axles and width guides can be fed into the system to enhance the system outputs.

The Range Rover's front headlights incorporate optional high beam assist technology. This can automatically switch on high beam headlights where external light levels are below the system's threshold. Importantly, the system is also designed to detect preceding and approaching traffic, and in a split second will automatically switch back to low beam to avoid dazzling others.

All-new electrical architecture

The performance of many of the 2010 Range Rover's advanced technologies is enhanced by a completely new electrical architecture which supports more efficient integration between the various systems. Information is shared between electronic components via a high speed Controller Area Network (CAN), with a fiber optic Media Orientated System Transport (MOST) network controlling the modules of the infotainment system, enhancing reliability and saving weight.

The press release follows:

The new Land Rover LR4 – the most capable Land Rover ever

LR4 – new generation of Land Rover's versatile SUV, introducing a new engine, improved dynamics and fresh design

* Refined, efficient and powerful new LR-V8 5.0L direct injection engine
* Impressive 375 lb/ft torque and 375 bhp
* ULEV2 compliant
* On-road dynamics transformed by comprehensive chassis system developments and a new super-smooth 6-speed adaptive transmission
* Updates to Land Rover's award-winning Terrain ResponseTM system reinforce class-leading all-terrain performance
* Fresh exterior design includes smoother new front end and revised lights, including LEDs
* All-new interior design delivers a more premium and functional five and optional seven-seat space
* User-friendly new features include available Surround Camera system, Gradient Release Control, Tow Assist, available Automatic High Beam Assist, and Keyless Entry, Push Button start.
* The new, fourth generation of Land Rover's supremely versatile SUV gains a new name – Land Rover LR4 – to go with its powerful and highly efficient new LR-V8 engine, fresh exterior identity and more premium cabin. The class-leading breadth of capability is extended even further with dynamic improvements for both on-road and off-road driving, and Land Rover has added a battery of user-friendly new technologies and features.

"The outgoing LR3 has well over 100 international awards to its name. But for the new LR4 we've found ways to improve virtually every aspect of the vehicle's design and engineering – some subtle, some major. New design signals comprehensive engineering change under the skin," says Phil Popham, Land Rover Managing Director.

Star billing on the LR4 goes to the highly efficient and refined new LR-V8 direct injection engine. This delivers 25% more power and 19% more torque than the previous 4.4-liter engine. The power and torque are both accessible across the entire rev range, to deliver immediate throttle response and effortless cruising ability, giving a 0-60 mph time of 7.5 seconds (0-100km/h in 7.6 seconds.)

Land Rover's engineers have also transformed the LR4's on-road ride and handling, and even improved on the much acclaimed all-terrain capabilities of its predecessor. The comprehensive changes include new suspension components, revised steering, larger brakes, improved traction control, and enhancements to the award winning Terrain ResponseTM system, which helps optimize the vehicle for virtually all on-road or off-road driving situations.

The iconic exterior design has been updated, most obviously with smoother and simpler surfaces at the front, including a new, more aerodynamic bumper. The sportier new lights help give the vehicle new character, and include LED technology front and rear. The sleek new front headlights include available 'High Beam Assist', automatically switching on or off the high beam, as conditions require.

Aerodynamic changes to the front end, with the revised front lower chin spoiler and new front wheel deflectors, help to reduce drag by increasing underfloor airflow, and LR4 is fitted with new 19-inch wheels and tires optimized for rolling resistance and improved tire wear.

The interior is completely redesigned, with a transformed dash and center console, new seats and an array of new, user friendly features.

"The new interior not only has a much more premium look and feel, it's also gained improvement to its functionality. The new console inclines towards the driver, the switchgear and controls fall more readily to hand, and new LED ambient lighting helps make the cabin a more pleasant and more easily used space after dark. We've made the interior environment more premium too, with smoother surfaces, softer materials and close attention to critical details such as stitching," says Gerry McGovern, Land Rover Design Director.

New features available for the LR4 include a portable audio interface, available HD Radio, a new available five-camera 'surround' system, for easier parking and towing, and a new key system which offers Keyless Entry and Push Button start.

"The changes and upgrades for LR4 transform many aspects of the previous generation, at the same time enhancing the flexibility and versatility for which this vehicle is famous. It can carry huge loads in its spacious interior, climb mountains, cruise across continents, haul trailers* or transport up to seven family and friends in comfort. I can't think of a more versatile vehicle anywhere," says Phil Popham.

* Maximum trailer weight with brakes; 7716lbs (3500 kg)

All new, LR-V8 5.0L direct injection engine.

"Our new 5.0-liter V8 was conceived from the onset with Land Rover models in mind. Designed with the emphasis on low-end torque, it is particularly suited to the LR4's wide range of capabilities both on and off road."
Engine Group Chief Engineer, Malcolm Sandford.

The LR4's new 5.0-liter LR-V8 is optimized for a balanced combination of performance and efficiency, thanks to its wealth of new features and industry firsts.

Designed entirely in-house by Jaguar Land Rover powertrain engineers, the
LR-V8 5.0L is one of the most advanced engines ever built. The new LR-V8 develops 375 bhp and 375 lbs/ft torque, bettering the previous 4.4-liter V8 for power and torque by 25 percent and 19 percent respectively. Yet when it comes to emissions the engine meets the stringent American ULEV2 (ultra low emissions vehicle) regulations.

Direct injection – increased power and torque with optimized emissions
A key feature of the new LR-V8 is an industry first, centrally-mounted, multi-hole, spray-guided fuel injection system, delivering fuel at a pressure of up to 150bar (2175 psi) directly to the cylinder.

Fuel is delivered by twin, high pressure fuel pumps driven via an auxiliary shaft in the all new engine block. Delivery of fuel direct to the cylinder has substantially contributed to improved low speed dynamic response which is particularly useful off-road while adding to driving pleasure on-road. The charge cooling effects of the direct injection fuel system have allowed the compression ratio to be raised to 11.5:1.

New variable camshaft timing system boosts engine torque, saves energy

A new type of variable camshaft timing system (VCT) introduces another industry first. The four VCT units are activated by the positive and negative torques generated by opening and closing the intake and exhaust valves, instead of by oil pressure. As a result the engine oil pump has been reduced in size, saving energy and improving engine efficiency.

VCT units work independently on all four camshafts and timing is optimized by the engine control unit for torque, power and economy at every point in the engine's speed range.

The response rate of the new VCT units is 25 percent higher than before, and therefore delivers a more immediate engine response to the driver's demand.

The new engine has also been optimized for low-end torque, making it possible to activate the lock-up clutch of the ZF HP-28 automatic transmission at lower speed. This reduces 'slip' in the hydraulic torque converter benefiting both fuel consumption and CO2 emissions. The higher torque at lower rpm also enables longer gearing for more economical cruising.

The LR4 incorporates several other energy saving features too. At standstill, the idle speed of the V8 has been reduced from 700rpm to 600rpm yielding fuel savings without compromising refinement. An Intelligent Power Management System includes smart regenerative charging, so whenever possible the alternator charges the battery when it is most economical to do so, such as when the car is coasting rather than accelerating.

Strong and compact
The new LR-V8 engine is built around a stiff, all new, aluminum block with cast-in iron liners and cross-bolted main bearing caps, to reduce noise, vibration and harshness. For the first time at Land Rover, the blocks are high pressure die-cast rather than sand-cast, providing a superior finish and dimensional greater accuracy. The engine also has aluminum heads, with four-valves per cylinder and a strong, spheroidal-graphite cast-iron crankshaft with steel connecting rods. The cylinder heads and block are manufactured using recycled aluminum alloy for the first time, thus reducing the environmental impact of manufacturing the new engine.

The new LR-V8 is also more compact than its predecessors. Overall engine length has been reduced through relocation of the oil pump within the engine architecture.

LR-V8 5.0L naturally aspirated engine in short

• 375 bhp and 375lbs/ft torque
• 25 percent more power, 19 percent more torque than the existing 4.4-liter
• Meets ULEV2 emissions regulations
• Highly efficient multi-hole central spray-guided direct injection – industry first
• Torque-actuated variable camshaft timing on all four cams – V8 engine industry first
• Camshaft profile switching
• Variable length inlet manifold optimizes power and torque
• Reverse cooling improves engine efficiency and speeds cabin warm-up.
• Class-leading, low-friction design features
• Lightweight construction uses recycled materials
• 15,000 mile (24,000 km) service intervals

The new LR-V8 engine has been developed by a joint Jaguar Land Rover engineering team, with base characteristics designed from the onset with the requirements of both brands in mind. High levels of torque and fast response from low revs perfectly suits both Jaguar and Land Rover DNA. The Jaguar version, the AJ-V8 Gen III, was recently launched in the new XF.

Although the basic architecture of both engines is the same, the Land Rover version has a number of special developments. The LR-V8 has a deeper, pressure die-cast sump to accommodate the extreme tilting angles that Land Rover vehicles can be subjected to during all-terrain driving. The LR4's LR-V8 is also fitted with a mechanical cooling fan and, for packaging reasons, the inlet manifolds have been designed especially for the vehicle, while achieving the desired levels of noise vibration and harshness (NVH).

For the Land Rover version, belt drives are waterproofed, as are the alternator, air conditioning compressor, power steering pump and starter motor. The engine is also tuned specifically to allow for the greater demands made on the LR4, particularly for towing and all-terrain driving.

Responsive new transmission
The LR-V8 is mated to the revised and super-smooth ZF HP28 6-speed automatic transmission. Its characteristics have been optimized by Land Rover engineers to provide class-leading response, with rapid and refined shifts. The dramatic enhancement of both power and torque low down the rev range on the new engine have made it possible to actuate the transmission's lock-up clutches much earlier in each gear, reducing slip through the hydraulic torque converter, so helping with the improvements in both efficiency and CO2 emissions.

Dynamics transformed
Major dynamic advances introduced for the LR4 include revised suspension architecture, improved steering, larger brakes and enhanced versions of Land Rover's award-winning Terrain ResponseTM and Hill Descent Control systems.
The list of changes starts with new suspension knuckles, designed to reduce the separation between the suspension roll center and the vehicle's center of gravity (reduction of 1.65 inch (42mm) at the front and 2.44 inch (62mm) at the rear). This dramatically reduces the vehicle's natural body movements when cornering. These roll rates are further controlled by a stiffer and larger anti-roll bar.

In addition, new bushings and new front and rear dampers enhance ride quality.
The variable ratio steering rack is revised, complementing the improved ride quality by improving center line stability at high speed cruising and slightly increasing sensitivity at higher lock angles. This enhances the sense of driver involvement in high-speed maneuvers, and also increases precision for low speed control and off-roading.

The redesigned front bumper also helps improve steering feel, as its new front wheel deflectors help reduce aerodynamic lift at the front of the vehicle by up to 50% at higher speeds.

Increased stopping power
A new, larger brake system has been introduced to cater to the LR4's enhanced performance and to improve braking feel. This new system is inspired by the four-piston, opposed-caliper performance system derived from the Range Rover Sport. It employs a 14.2-inch (360mm) ventilated front disc with a new, cast iron twin-piston sliding caliper – which serves to reduce the size of the front brake package while preserving its stiffness, which in turn helps achieve excellent pedal feel.

At the rear, a single piston sliding caliper, now manufactured in aluminum to help reduce vehicle weight., operates on a 13.8-inch (350mm) ventilated disc,. An additional advance to the braking system is the new emergency brake light function. When the vehicle undertakes severe or emergency braking, the brake lights flash, to reduce the risk of rear end collisions.

More control in the corners
A refinement to the Dynamic Stability Control system helps automatically slow the vehicle if taking a corner too fast, enhancing driver control. The system operates according to steering inputs from the driver. In extreme cases, automatic braking intervenes to reduce the vehicle speed, with the braking pressure level applied according to the steering inputs.

Updates for award-winning Terrain ResponseTM and Hill Descent Control
For LR4, Land Rover's award-winning Terrain ResponseTM system gains new features and refinements, further extending the vehicle's all-terrain capability. Terrain ResponseTM optimizes the vehicle set-up for virtually all on-road or off-road driving situations, with five different settings to suit different terrains:

* General driving
* Grass/gravel/snow
* Sand
* Mud and ruts
* Rock crawl
* For soft sand – one of the most power-hungry surfaces – 'sand launch control' has now been introduced, which makes for noticeably easier drive-away. New, speed-dependent wheel-slip targets for the traction control system permit only very limited wheel-slip, helping to prevent the wheels digging down into the sand.
* New for LR4, revisions to the rock crawl program apply low level brake pressure when the vehicle is in first or reverse gear at speeds below 3 mph (5km/h). This low-level brake force reduces the vehicle's roll tendency and the intervention of the traction control system, giving a more composed drive through rocky terrain.

Land Rover's much-acclaimed Hill Descent Control system is enhanced on LR4 with the addition of Gradient Release Control. This inhibits the initial rate of acceleration when descending very steep inclines, to increase control when braking is released at extreme angles.

The system activates automatically whenever Hill Descent Control is engaged, temporarily maintaining brake pressure after the driver releases the brake pedal. It then progressively eases braking pressure to control vehicle momentum and acceleration. Once the vehicle's target off-road speed is achieved, Hill Descent Control operates to take the vehicle to the bottom of the slope in its customary composed manner.

A new face on a distinctive design
"LR4 stays true to its clean, geometric, architecturally-inspired predecessors, while its new front bumper, lights and face with smoother lines and subtle curves, together with more color-coding, combine to enhance the overall impression of premium quality."
Gerry McGovern, Design Director,

The Land Rover LR4 has evolved a distinct design heritage over 20 years and four generations of iconic, instantly recognizable vehicles. LR4 inherits the clean lines of the previous generation, but now subtly updated and given a more premium, more contemporary look.

Smoother, simpler surfaces are employed at the front, giving the vehicle its new character, emphasized by sportier looking front lights, with new LED position lamps configured in a unique, signature stepped profile around the main light units. New lights are also introduced at the rear of the vehicle, incorporating LED stop, tail and indicator technology.

The new front bumper has a larger cooling aperture to accommodate the new engine's greater power outputs. Cleverly, the larger bumper actually improves vehicle aerodynamics by reducing drag, thanks to its innovative front wheel deflectors that help smooth the airflow from the front bumper around the front wheels.
A new, twin seven-spoke 19" wheel design is introduced on the LR4 to complement the existing seven-spoke 19" wheel and, for the first time, a new striking, 10-spoke 20" wheel is available as a factory-fit option.
Three new paint colors complete the exterior changes for LR4 - Nara Bronze, Bali Blue and Ipanema Sand.

All-new interior
"The interior of LR4 continues to offer the driver and passengers superb visibility and versatility. But the re-designed fascia and console architecture plus the use of premium materials, make the cabin a much more desirable place to be."
Gerry McGovern

The new interior for LR4 combines smooth, flowing surfaces with significant reduction in the complexity and number of controls. It provides a much softer, more premium all-round interior ambience, but still in keeping with the vehicle's signature architectural theme.

The new console is now inclined towards the driver, improving visibility and access to the controls. The Terrain ResponseTM control is now more prominently located at the front of the center console, making way for the cup-holder in a more accessible position, mid-way along the console.

All models feature a new steering wheel, with revised switch layout for driver information, remote audio controls, cruise control and heated steering wheel.
A choice of natural-finish woods, along with stitched and wrapped fascia, door casings and center console, add to the crafted bespoke feel. There are also two new interior contrast colors, a mid-tone Nutmeg and a darker Arabica, complementing the existing Almond light interior colorway.

New seating is introduced for rows one and two, with a new, extended front seat cushion profile to improve support and seating comfort and, for the first time, the front seats feature height-adjustable head restraints in place of the traditional seat mounted grab handles. HSE vehicles specified with the Premium Leather pack also feature electrically adjustable seat bolsters, allowing front occupants to tailor their seating's support. For convenience, the electric seat memory controls are relocated to the door casing.

New ambient lighting adds the finishing touch to the interior, with the introduction of white LED's to cast subtle halos around the metal-plated interior door handles and pockets. The fascia and center console area, complete with soft-stitching, and switchgear highlighted in "Noble" finishers, also benefit from the interior mood lighting when vehicle lights are on.

Technology made simple
The LR4 is packed with easy-to-operate and useful features, not technology for technology's sake. The aim throughout is to simplify the operation, to help make journeys more relaxing and stress-free
Stuart Frith, Chief Program Engineer

Inside and out, the LR4 gains a raft of relevant new technology, to improve the driving experience.

The navigation system adopts an easy-to-use menu structure which now also features 'towards guidance'. This supplements the junction map and icon-based information with details of the actual road signage viewed by the driver along the route.

The new available Portable Audio Interface allows connectivity to an array of personal audio storage devices, USB sticks and MP3 players, enabling the various devices' functions to be accessed and controlled via the fascia-mounted touch-screen system. One of the connectivity ports is a dedicated Apple i-PodTM point made exclusively by Land Rover, for continued functionality in extreme driving conditions, by helping to prevent the device coming loose from the socket.

A new 5-inch Thin Film Transistor (TFT) driver information LCD screen is also introduced with LR4. Sitting within the re-designed instrument cluster, the message center display ensures key information is communicated in a clean, simple and user-friendly manner.
And a purer, crisper radio sound is now available thanks to the introduction of HD Radio in the US. Along with the fine listening experience, comes additional features such as song title and artist information.

Cutting edge user-friendly technologies
Outside the vehicle, convenient and relevant new systems enhance safety and security.

The new front headlights incorporate available Automatic High Beam Assist technology. This can automatically switch on high beam headlights where external light levels are below the system's threshold. Importantly, the system is also designed to detect preceding and approaching traffic, and in a split second will automatically switch back to low beam to avoid dazzling others.

No less than five digital cameras make up the new available surround camera system, relaying to the touch-screen a near 360-degree view. The cameras, which support easier parking, towing and off-road maneuvering, function immediately as the vehicle is started, and have options for selecting and zooming in to assist with close quarter parking and with towing.

The 'tow assist' function (selected from the touch screen menu) helps perform accurate towing maneuvers. The wide fields of views on the side cameras give a clear view of the reversing trailer: the images are electronically manipulated to provide an undistorted view, with guide lines overlaid on the rear camera image to illustrate both the vehicle and trailer's trajectory.

Specific characteristics such as type of trailer, number of axles and width guides can be fed into the system to enhance the system outputs.

Another towing aid, Trailer Stability Assist, detects trailer oscillations by monitoring key vehicle behaviors, such as uninvited steering movements and slight vehicle swing in response to trailer behavior. In these circumstances, the system can initiate engine torque reduction and braking interventions to bring the towing back under control.

And finally, the LR4's sophisticated new remote key offers available Keyless Entry and Push Button start.

Since the problems of over-productions are global, we've put together a selection of photos of cars stacking up around the world. Sometimes they're being stacked in strange places like the above shot from Nissan's test track. Usually, the location is more pedestrian with recently produced cars plopped out front of the factories they're produced at. For instance, Land Rovers and Jaguars are now being stacked up outside a plant in Liverpool. Similarly, Ford F-150s are piling high in Detroit near their assembly facility.

Foreign cars, primarily from Japanese automakers, have filled the holding lots at the Port of Long Beach, waiting to be requested by dealers. The same is occurring in lots and ports in Valencia, Spain and central Britain.

Still, the best use of space has to go to Nissan for using the test track outside of their Sunderland plant in England. The sight of all those Nissan Micras lined up three-wide around the banks of the big turns and in the infield is both strange and kind of sad. It looks as though they've left enough room around the edge to still drive but doing so at high speed would probably be fairly discomforting. Thanks to Adil for the tip!

Photos: David McNew/Getty Images, ANDREW YATES/AFP/Getty Images, Christopher Furlong/Getty Images, David Goddard/Getty Images,Spencer Platt/Getty Images, Matt Cardy/Getty Images, Nigel Roddis/Reuters

[Guardian via Japanese Car Blog]

You hear a lot about the Toyota Land Cruiser, but don't forget that Nissan also made an off-road truck back in the day! That's right, we mean the Nissan Patrol, and you can get this '69 (go here if the ad disappears) for under a thousand bucks. Well, that's the asking price; reading the statement "i have it parked behind my house in Norwood and sold the house so I need to n move it" and checking out the photos makes us think the real price might be a lot lower. It ran when parked "a few years ago" (probable translation: 1995), and Colorado is pretty dry- probably not much rust. How hard could it be?

Let's look at the question of which vintage 4-wheel-drive to get in a different way: say you're an African warlord and you need to move your stash of gold bars and AK-47s across the border before some up-and-coming regional strongman takes it away from you. What vehicle do you want to use? No, you can't have a Toyota Hilux- that's against the rules of this game. That's right, you'll take an old Land Rover! So when you're scouring the mossy, mildewy wilds of coastal Oregon for a nice off-road machine to take on the kind of camping trip that resembles the Bataan Death March, what's it going to be? You got it- this '1960ish' Land Rover (go here if the ad disappears). Sure, it needs everything replaced a little TLC, and the rust problem is terminal somewhat severe, but it's only $350! In a single sentence, the seller maps out the road in front of the next owner of this fine British machine: "Has motor where it should be but tranny parts are in back seat of vehical & does not run." See, the motor is where it should be! Easy project, for sure!

>